Roland U-8CW Getting Started Manual page 30

Getting Ready to Use the U-8
Manual settings
Settings for the MIDI device
If you migrated the old Cakewalk settings to the new one, you cannot use
Cakewalk Home Studio with the U-8 even if you follow the procedure
below. In that case, be sure to read Migrating your old Cakewalk setting
to the new one (p. 29) and run the auto settings program.
1
Choose Options-MIDI Devices to open the MIDI Ports dialog box.
2
In the Input Ports column, select U-8 MIDI IN and U-8 CONTROL IN.
3
In the Output Ports column, select U-8 MIDI OUT (or Roland VSC 3.0 if
you are using VSC 3.0) and press the Move Selected Devices to Top
button so that it appears at the top of the list. Then, select U-8 CONTROL
OUT.
Using the U-8 for the MIDI output port
fig.32-1.e.eps_45
Using VSC for the MIDI output port
fig.32-4.e.eps_45
4
Click OK to finish the settings.
Settings for the AUDIO device
1
Choose Options-Audio to open the DirectShow Audio dialog box.
2
Click the General tab.
3
In the Playback Timing Master column, select U-8 WAVE OUT 1
[MASTER] (or Roland VSC 3.0 if you are using VSC 3.0) and in the
Record Timing Master column, select U-8 WAVE IN.
30