Roland U-8CW Getting Started Manual page 59

1
Disconnect all USB devices connected to the computer except the U-8, USB
mouse, and USB keyboard.
* The following procedure may delete drivers for USB devices that were not
disconnected. Be sure to disconnect such devices.
2
Click the Windows Start button, and from Settings, choose the Control
panel. In Control Panel, double-click the System icon.
3
Click the Device Manager tab, and with View devices by type selected,
make sure that there is no Other devices. If there is, double-click it, and if
there are any USB Composite device, Composite USB device, or
Unknown Device below it, click to select them, and then click the Remove
button to delete them.
fig.del-1.e
4
In the Delete Device? dialog box, click OK.
5
Make sure that Other Devices, USB Composite Device, Composite USB
Device, or Unknown Device are not displayed in the list.
6
Double-click Universal Serial Bus Controllers, and if there are any USB
Composite Devices below it, click to select them, and then click the
Remove button to delete them.
fig.del-2.e
7
Make sure that there is no USB Composite Device below Universal
Serial Bus Controllers, and click Close to close the dialog box.
Information That You May Find Useful
59