Getting Ready To Use The U-8 With A Computer; Before You Install The U-8 Driver - Roland U-8CW Getting Started Manual

Getting Ready to Use the U-8

Getting Ready to Use the U-8 with a Computer

Before you read this chapter, you need to install the included software first.
If the software is not installed yet, refer to Preparing for Use of the
Included Programs (p. 20) to install them.

Before You Install the U-8 Driver

You cannot use the U-8 with Windows95, Windows NT, nor
Windows 2000.
If an older version of the U-8 Driver is already installed in your
computer, you must delete it as explained in "Deleting the U-8
Driver (p. 57)."
Exit all other Windows applications before you install the U-8
driver.
If you will be connecting your computer to both the U-8 and another
Roland USB-compatible device such as the UM-4 (Super MPU64)
and using them at the same time, you must disconnect the other
device (UM-4 etc.) from the USB connector before installing the U-8
Driver. If the UM-4 etc. remains connected at the time that the U-8
Driver is installed, the U-8 Driver may not be installed correctly.
24