Table of Contents
Advertisement
Getting Ready to Use the U-8
fig.05-12a
REC
MONITOR
MASTER
4
Press the Stop Button to stop play.
5
To quit Cakewalk Home Studio U-8, choose Exit from the File menu.
Is the demo song played back correctly?
If the song is played back correctly, the connection and the software
installation have been made successfully. If not, check the following points
first.
• Are the Track Volume Faders and Master Volume Fader turned up?
• If the U-8's output is connected to your stereo system or the like, check
its settings. If you are using headphones, check whether the Headphones
Volume knob is turned up.
If you still do not hear any sound, refer to the "Points Related to Audio"
under "Troubleshooting" in the online manual. You may find items that
provide a solution to the problem.
* If you are using VSC 3.0, lower the CPU Load, referring to the "Performance
Settings for VSC 3.0 (p. 37)."
* If you load wave data for a song from the CD/DVD-ROM drive, the sound may be
cut off, depending on your environment. This is because the speed of loading the
data from the CD/DVD-ROM drive is so slow that it cannot keep up with the song.
Should this be the case, you can copy the song data in the "Demo Songs" folder
to your hard disk before using it.
40
To learn how to view the
troubleshooting, refer to
"How to View the Online
Manuals (p. 53)."
For further information on
the included demo songs,
The Included
refer to "
"
Song Data
(p. 68).
Advertisement
Table of Contents
