Roland U-8CW Getting Started Manual page 36

Getting Ready to Use the U-8
2
The following dialog comes up automatically.
Click the Virtual Sound Canvas 3.0 button.
* If the MENU dialog does not come up automatically, you can also install the
programs by choosing Start - Run and running the application named Setup.exe
from the CD-ROM.
fig.05-07a.e.eps_50
3
The installer will start up. Click Next.
4
A message appears asking you if you agree to the terms of the license
agreement. Read the agreement carefully; if you agree to the terms, click
Yes. Clicking No cancels the installation.
5
The following confirmation dialog will be displayed if you already have
VSC-55/88 installed on your computer. If this message does not appear,
then please go to Step 9.
fig.1-5
6
The Installation Type dialog box is displayed. With both items checked,
click on Next.
fig.1-6
36
If you want to easily reinstall the currently
installed VSC 3.0 or VSC-55/88, choose
"Creating backup copies of the previously
installed VSC," and click on "Next." After
installation, the [VSC Restore] icon is
created on the Desktop. You can restore the
original conditions by double clicking this
icon.
If it is all right to overwrite the currently
installed VSC 3.0 or VSC-55/88, clear the
check, then click on "Next."
The MIDI output and audio playback
device are set to VSC 3.0, so you can use
VSC 3.0 from other software.
Check this if you want to open a .mid file
using VSC 3.0 from Windows Explorer etc.
(When installing other software afterwards,
.mid files may be registered to the software
other than VSC 3.0.)