Roland U-8CW Getting Started Manual page 23

9
After installing Cakewalk components, you will be asked whether you
want to restart your computer. To make the settings effective, be sure to
choose Yes, I want to restart my computer now in the Setup Complete
dialog box, then click Finish. Windows will restart.
Since the setup will continue after Windows has restarted, DO NOT take the
CD out of the CD-ROM drive.
fig.05-08e.e.eps_50
10
After restarting Windows, COPY dialog will appear. Click OK, then some
more files will be copied.
* There is a case that the dialog is layered behind the other windows. Press
on the Windows taskbar to show the dialog to the top.
fig.05-08h.e.eps_50
11
Depending on your computer settings, you will see DMA dialog here. Read
the dialog carefully, and press OK.
12
Click OK in the Completed dialog.
fig.05-08d.e.eps_50
This completes the installation.
To use Cakewalk software with the U-8, you need to connect the U-8 to the
computer and install the driver. For more information, refer to "Getting
Ready to Use the U-8 with a Computer (p. 24)."
Getting Ready to Use the U-8
23