Roland U-8CW Getting Started Manual page 67

Stereo Delay
The delay effect adds delayed sound to the direct
sound, giving more body to the sound or creating
special effects.
This is a delay with stereo input and output that lets
you set parameters separately for channels L and R.
DL Sw (switch) Turns the stereo delay effect on/off.
DL Time L This parameter adjusts the delay time (i.e., the interval for
DL Time R which sound is delayed).
Performs fine adjustment of the delay times. It's possible to
DL Fine L
vary the delay times for DL Time L and R by up to +/-5 ms, in
DL Fine R
steps of 0.1 ms.
This parameter adjusts the amount of feedback. Changing the
DL Fbk L
amount of feedback causes the number of time the delayed
DL Fbk R
sound is repeated to change as well.
Adjust the degree of HF damping. With a setting of 0, there
DL HF Damp L
will be no damping. As the value is decreased, damping will
DL HF Damp R
become more pronounced.
DL Balance L Adjust the balance between the effect sound volume and the
DL Balance R direct sound volume.
DL Level L
Adjusts the volume.
DL Level R
Tremolo
Tremolo is an effect that creates a cyclic change in
volume.
Select the type of modulation.
Tri: The sound will be modulated like a triangle wave.
Sqr: The sound will be modulated like a square wave.
TR Waveform
Sin: The sound will be modulated like a sine wave.
Saw1, 2: The sound will be modulated like a sawtooth wave.
* The [teeth] in Saw1 and Saw2 point at opposite direction.
TR Rate Adjusts the frequency (speed) of the change.
TR Depth Adjusts the depth of the effect.
TR Level Adjusts the volume.
Information That You Will Find Useful
67