Roland U-8CW Getting Started Manual page 25

Usb digital studio
Table of Contents

Advertisement

If using a computer upgraded from Windows95 to Windows98,
be sure to note the following points.
In the Control Panel of your computer, the Preferred device list for
Playback or Recording in Multimedia-Audio may contain a voice modem
device such as Voice Modem Wave #00 Line or Voice Modem Wave #00
Handset. (The name may differ depending on your computer.)
If these are already present when you install the U-8 Driver and you re-start
Windows, it may be impossible to start (re-start). The operation of your
computer may also become unstable.
If using a computer upgraded from Windows95 to Windows98, use the
following procedure to first set the Voice Modem Wave #00 Line and/or
Voice Modem Wave #00 Handset devices to the Disabled state.
1. Click the Windows Start button, point to Settings and select Control
Panel. Next, in the Control Panel, double-click System.
The System Properties dialog box will appear.
2. Click the Device Manager tab.
3. Double-click Sound, video and game controllers.
A list of devices will appear. If the list of devices does not contain Wave
Device for Voice Modem, click OK to end the procedure.
fig.02-02.e.eps
4. Double-click Wave Device for Voice Modem.
The Wave Device for Voice Modem Properties dialog box will appear.
fig.02-03.e.eps
5. Click the General tab and in the Device usage area, click the check box
for Disable in this hardware profile, and then click OK.
Getting Ready to Use the U-8
The name "Wave Device
for Voice Modem" may
differ depending on your
computer system. If so,
select a device named
Voice Modem.
25

Advertisement

Table of Contents
loading

Table of Contents