Roland U-8CW Getting Started Manual page 31

fig.32-2.e.eps_45
4
Click the Drivers tab.
5
Select U-8 WAVE IN in the Input Drivers column, and U-8 WAVE OUT 1
[MASTER] and U-8 WAVE OUT 2 [EFFECTS] in the Output Drivers
column. Or, if you are using the U-8 with VSC 3.0, select Roland VSC 3.0,
and do not select other drivers.
Using the U-8 for the Audio Output driver
fig.32-3.e.eps_45
Using VSC for the Audio Output driver
f
ig.32-6.e.eps_45
6
Click OK to finish the settings.
Getting Ready to Use the U-8
31