System Requirements For Vsc 3.0 - Roland U-8CW Getting Started Manual

Usb digital studio
Table of Contents

Advertisement

Information That You Will Find Useful

System Requirements for VSC 3.0

Operating System:
Microsoft® Windows® 98/Windows® 95
* You cannot use with Windows® NT.
Computer:
IBM PC or compatible computers
* You cannot use with MWave audio device which is equipped on IBM PC.
CPU/Clock:
Pentium® processor with MMX® technology 166 MHz or higher,
Pentium® II processor or Pentium® III processor
Memory(RAM):
32 MB or more
Hard Disk:
20 MB of free space
Resolution/Colors of Display:
640 x 480 or higher/32,000 colors or higher
Audio Device:
A built-in sound device or a sound card supporting Windows® 98/
Windows® 95 (16-bit stereo, 44.1/22.05/11.025 kHz sampling rate.)
CD-ROM drive
Microsoft® Internet Explorer (version 3.01 or later) or Netscape
Navigator (version 3.01 or later)
* Although Roland has tested numerous configurations, and has determined that on
average, a computer system similar to that described above will permit normal
operation of the software, Roland cannot guarantee that a given computer can be
used satisfactorily with the software based solely on the fact that it meets the above
requirements. This is because there are too many other variables that may influence
the processing environment, including differences in motherboard design and the
particular combination of other devices involved.
70

Advertisement

Table of Contents
loading

Table of Contents