Table of Contents
Advertisement
Migrating Your Old Cakewalk Settings to the New One
If you choose to migrate the old Cakewalk settings to the new one when you
run Cakewalk for the first time, you need to run the setup file below to use
Cakewalk with the U-8.
1. Quit Cakewalk.
2. Insert the supplied CD-ROM to the CD-ROM drive.
3. Double-click the setup.exe on E:\SetCW.
4. If VSC is installed on your computer, you will be asked whether you
want to use it with the U-8. Choose Yes or No.
Once you run this setup program, it also sets the port settings for Cakewalk.
Therefore, it is not necessary to make the settings that is explained after this.
Making settings for Cakewalk Home Studio U-8
After installing Cakewalk Home Studio U-8, you need to make the
following settings to use the program.
There are two ways to make the settings. One is to run the auto settings
program and the other is to set it manually.
Auto settings
Running the following program makes the settings for Cakewalk Home
Studio automatically.
And if you migrate the old Cakewalk settings to the new one when you start
Cakewalk for the first time, you have to take run program.
1
Start Cakewalk and then quit it.
* This process is necessary for Cakewalk to recognize the devices it can use.
2
Insert the supplied CD-ROM into your CD-ROM drive.
3
Run the setup.exe on E:\SetCW, and follow the instructions on your
screen.
* If VSC is installed on your computer, you will be asked whether you want to use it
with the U-8. Choose Yes or No.
Getting Ready to Use the U-8
In this explanation we are
assuming that your CD-
ROM drive is drive E:, but
the drive letter may differ
on your computer. If the
drive letter is different on
your computer, input the
appropriate letter. To check
the drive letter of your CD-
ROM drive, double-click
the My Computer icon.
For information on how to
install VSC 3.0, see
"Installing Virtual Sound
Canvas 3.0" (p. 34).
29
Advertisement
Table of Contents
