Table of Contents
Advertisement
Before Use
Software Installation Sequence
Installation under Windows 95/98/Me, Windows 2000, and Windows NT4.0
uses the Auto Run feature. An example for operation under Windows 98 is given
1
below. Operation under Windows 95/Me, Windows 2000, and Windows NT4.0
is similar.
Limitation
❒ Close all other applications before starting the installation.
❒ Under Windows NT 3.51, installation using the Auto Run feature is not pos-
sible. See the Setup Guide for more information about how to install the Desk-
TopBinder V2 Lite in Windows NT 3.51.
Auto Run Feature
When the CD-ROM is inserted under Windows 95/98/Me, Windows 2000, or
Windows NT4.0, the Auto Run feature automatically starts the installation pro-
cess for the TWAIN driver and the various utilities.
Note
❒ Auto Run might not automatically work with certain OS settings. In this case,
launch "Launch.EXE" located in the CD-ROM root directory.
❒ If you want to cancel Auto Run, hold down the {Shift} key (when your system
is Windows 2000, hold down the left {Shift} key) while inserting the CD-
ROM. Keep the {Shift} key held down until the computer has finished access-
ing the CD-ROM.
Limitation
❒ When performing the installation under Windows 2000, Windows NT4.0,
and Windows NT 3.51, log on as a member of the Administrators group.
❒ Under Windows NT 3.51, installation using the Auto Run feature is not pos-
sible. For information about how to perform the installation, see the Setup
Guide.
12
Advertisement
Table of Contents
