Table of Contents
Advertisement
Initial Scanner Setup
❖ ❖ ❖ ❖ End of Scan Option
You can make the settings for cer-
tain operations performed after
scans. You can select from "Clear
settings after each scan job" and
"Display options after each scan
job".
• If you select "Clear settings after
2
each scan job", the scanner
clears the scan conditions, de-
livery destination and sender
settings once it finishes scan-
ning the originals.
• If you select "Show options after
each scan job", the scanner does
not clear the scan conditions,
delivery destination and sender
settings once it finishes scan-
ning the originals. This way,
you can set another original,
continue scanning and combine
the documents into one or use
the previous settings to scan a
separate document.
The factory default is "Clear set-
tings after each scan job".
❖ ❖ ❖ ❖ Border Erase
When shadows appear around the
edges (border) of scanned origi-
nals, you can erase the shadow by
painting it white.
You can select to erase "0 mm", "1
mm", "2 mm", "3 mm", "4 mm" or "5
m m " f r o m t h e f o u r e d g e s o f
scanned originals.
The factory default is "0 mm".
Note
❒ If one side of the scan area is set
to less than 20 mm, the setting
becomes invalid.
26
❖ ❖ ❖ ❖ Language Select
You can select the language dis-
played on the operation panel.
The available selections are En-
glish, Deutsch, Francais, Espanol,
P o r t u g u e s , N ed er la n d s , I t a l -
ianoand Japanease.
The factory default is "English".
❖ ❖ ❖ ❖ ADF Thin Paper
You can set the ADF to scan A5 ( 8.5"
x 5.5 ") size paper or thin paper that
is less than 52 g/m
Available choices are "On" and "Off".
• If you select "On", originals are
fed only after the document ta-
ble has finished adjusting its
height and the scanner has rec-
ognized the paper type.
• If you select "Off", originals are
set as usual. Use this setting
when you do not use thin paper.
When you select "Off", originals
are fed more quickly than when
"On" is selected.
The factory default is "Off".
❖ ❖ ❖ ❖ Job Delivery Data Max. Setting
You can set the maximum size of
files that can be transferred from
the scanner to the delivery server.
• "Off" sets no limit on the data
size for each document sent to
the delivery server.
• "On" allows you to enter a data
size limit (1 to 9999 MB by 1 MB
increments) with the number
keys for each document.
The factory default is "210 MB".
Note
❒ When you set a high resolution in
the scanning conditions, the size
of scan data is accordingly large.
The larger your data, the higher
the strain on the delivery server
and the system. For this reason, it
is recommended to scan images
at a moderate resolution.
2
(45 kg) thick.
Advertisement
Table of Contents
