Software For The Network Delivery Scanner - Ricoh IS330DC Operating Instructions Manual

Before Use

Software for the Network Delivery Scanner

ScanRouter V2 Lite
1
ScanRouter V2 Lite is to be installed on the delivery server. Scanned data can be
sorted and stored in specified in-trays, or saved in folders of client computers on
the same network.
❖ ❖ ❖ ❖ File storage folder
The files are stored in the following folder on the CD-ROM provided with the
scanner.
\UTILITY\ROUTERV2
❖ ❖ ❖ ❖ System requirements
The following system requirements must be met to use ScanRouter V2 Lite.
Note
❒ Install the software on a stand-alone server running Windows NT Server
or Windows 2000 Server. It must not be installed on the primary domain
controller or backup domain controller.
• Hardware
PC/AT compatible
• CPU
Pentium 200 MHz or faster (Pentium 350 MHz or faster recommended)
• Operating system
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
• Memory
64 MB or more (128 MB or more recommended)
• Hard disk space
Minimum free space required for installing: 200 MB
Note
❒ In addition to the space required for installation, the hard disk should
have at least 500 MB of free space for files. High resolution (for example
600 dpi), high color scans become very large files, so confirm that you
have enough space on your hard disk, as required. File sizes always
vary according to file type and resolution. For details, see the Scanner
Reference.
• Network protocol
TCP/IP
8
®
Windows95 (OSR 2 or later)
® ®
Windows 98
® ®
Windows 98 Second Edition
® ®
Windows Millennium Edition
® ®
Windows 2000 Server
® ®
Windows NT Server 4.0 (with Service Pack 5 or higher)