Sending Scans With A Network Delivery Scanner - Ricoh IS330DC Operating Instructions Manual

Sending Originals
Sending Scans with a Network Delivery
Scanner
Specify a destination and scan your original, then send it to the delivery server.
Documents delivered from the scanner to the delivery server are delivered to the
specified destination according to the settings made in the ScanRouter V2 Ad-
ministration Utility.
This section describes function displays of the network delivery scanner and the
sequence for sending documents to the delivery server.
3
Note
❒ You need a delivery server to send documents.
❒ To use the ScanRouter V2 Administration Utility, you must first create an ad-
dress book (list of destinations and senders) on the delivery server. For details
on how to configure the ScanRouter V2 Administration Utility, see the Scan-
Router V2 Management Guide and the ScanRouter V2 Administration Utility
Help.
❒ It is possible to send a document of up to 100 pages.
❒ Since you can store up to five documents waiting for delivery in the scanner,
you can scan other documents while one is being sent to the delivery server.
❒ When the following screen appears, the scanner is ready to work as a network
TWAIN scanner. Press [Cancel] to switch to the network delivery scanner
screen.
34