C
Press 0 0 0 0 or 1 1 1 1 until the item you
want to set is highlighted, and
then press [OK].
Note
❒ When the item you want to set
is not displayed, press [↑ ↑ ↑ ↑ Prev.]
or [↓ ↓ ↓ ↓ Next] to display the desired
item.
Reference
For a detailed explanation on
the contents of scanning condi-
tions, see P.17 "Settings".
D
Press 0 0 0 0 or 1 1 1 1 to select the setting
value, and then press [OK].
Note
❒ When you want to enter the val-
ue, enter a digit with the num-
ber keys, and then press the {#}
key.
E
Repeat steps C C C C to D D D D to change oth-
er settings.
F
Press [OK] to finish.
G
Highlight "Manual settings" and
press [OK].
Sending Scans with a Network Delivery Scanner
3
41