Errors & Remedies - Epson Stylus Photo R2000s Series Service Manual

EPSON Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series
1.5.4 Errors & Remedies
Table 1-19. Errors & Remedies
Error Error
Fatal error A mechanical error has occurred. Turn the power Off and back it On.
Maintenance Waste ink pads need to be
request replaced.
• The CDR Tray Base was open
when receiving or printing a
ASF print job.
CDR guide error
• The CDR Tray Base was
closed when receiving or
printing a CDR print job.
A paper jam has occurred.
Paper jam
Failed to feed paper.
No paper
Multiple sheets of paper were fed
Multi-feed
at the same time.
Ink-out The cartridge has run out of ink.
No ink cartridge Ink cartridge(s) was not detected. Replace the cartridge with a new one.*
Wrong ink Incorrect ink cartridge(s) was
cartridge detected.
The paper was loaded in a
Paper path error different way from the specified
one.
Printing was executed with the
Cover open error
Printer Cover open.
The black ink cartridge was
replaced during printing.
3
Ink Color error*
Cleaning after black ink
replacement cannot be
performed.
Product Description
Remedies
Replace the waste ink pads and reset
the counter.
Close the CDR Tray Base.
Open the CDR Tray Base.
<When printing on paper>
Remove the jammed paper and press
1
the Paper button.*
<When printing on CDR>
Remove the jammed CDR tray and
press the Paper button.
Load paper correctly and press the
1
Paper button.*
Press the Paper button to eject the
1
multiple sheets.*
2
Replace the cartridge with a new one.*
2
Replace the cartridge with the correct
2
one.*
Eject the fed paper and press the Paper
button after loading paper in the
specified way.
Close the Printer Cover.
Replace the cartridge with the one
used before the error.
Replace the black ink cartridge with
the one used before the error, or the
one that has sufficient amount of ink.
Operation Buttons & Indicators (LEDs)
Note : For more information on the remedies, see
Error Messages" (p.36).
Note *1: When the CDR Tray Base is opened, close the CDR Tray Base and press the Paper
button.
*2: When the CDR tray has been inserted, remove the CDR tray and press the Ink button.
*3: Stylus Photo R2880 only.
Revision I
"3.1.1 Troubleshooting according to
29