Epson Stylus Photo R2000s Series Service Manual page 206

Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series
Error Contents
Motor drive CR (PID) driving
time error time over error
PF (PID) driving time
over error
ASF driving time
over error
PUMP driving time
over error
APG driving time
over error
Factory Error due to EERPM
command verify command
error
Printhead Transistor
error temperature error
X-Hot detect error
before printing start
X-Hot detect error
after flushing
Head temperature
error
Head error
SC-P400 Series
Error
Failed Parts/Remedies
Code
D1H Main board failure
D3H Main board failure
D5H Main board failure
D6H Main board failure
D7H Main board failure
30H -
40H Main board failure
41H Printhead failure, Main board failure
42H Printhead failure, Main board failure
43H Printhead failure, Main board failure
44H Communication error between
Printhead and Main board has occurred
[Remedies]
1. Update the Firmware.
2. Confirm the connection with Head
FFCs.
3. Replace the Printhead, Head FFC
or Main board.
Errors/Fatal Errors and Remedies
Error Contents
Sequence CR home position
error seek error
CR unlock
confirmation error
CR lock reset
confirmation error
PF/ASF reset error
LD Roller reset error
Sensor error PW Sensor failure
error
PW Sensor foreign
object detection error
CDR Sensor
APG error APG specified
position drive error
APG reset error
APG drive error due
to factory commands
Mechanism Mechanism Unit
Unit error
abnormal error
Ink device Ink device error
error
Circuit error Circuit error (include
blowout of a fuse)
Revision I
Error
Failed Parts/Remedies
Code
50H Paper jam, foreign object, deformation
of the main frame
51H Paper jam, foreign object, deformation
of the main frame
52H Paper jam, foreign object, deformation
of the mainframe
53H ASF sensor failure, ASF motor failure
54H ASF sensor failure, ASF motor failure
60H PW sensor failure, Main board failure
61H PW sensor failure, Main board failure
62H Failure of the sensor for the front tray
70H APG Unit failure (APG sensor failure,
APG motor failure)
71H APG Unit failure (APG sensor failure,
APG motor failure)
72H -
73H Mechanism Unit failure.
[Remedies]
1. Cleaning in the printer (Paper dust,
smeared with ink) (p.164)
2. Replace the Printer Mechanism
(p.98)
B0-CFH Ink cartridge failure, CSIC terminal
failure, CR contact module failure,
Main board failure
80H Main board failure
206