Epson Stylus Photo R2000s Series Service Manual page 203

Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series
Table 9-5. Indicators (LEDs) Function
Printer status
Power
Maintenance request Flashes
OFF
(waste ink pad end) alternately2
Front guide error Flashes at
--
high speed
Cover open error --
Paper (CDR) jam --
Paper path error --
CDR tray error --
No paper error --
Roll end error --
Multi-feed error --
During ink scrambling
Flashes3
sequence
Ink cartridge replacement
Flashes
is in progress
Ink sequence is in progress Flashes
No ink cartridge or ink-out
-- Flashes
error
CSIS error -- Flashes
Ink color error Flashes at
--
speed
During printing Flashes
Access point setting error
--
(Security key exchange)
Access point setting error
--
(General)
Access point setting error
--
(Registration)
Access point setting error
--
(PINCODE authentication)
Success Wireless LAN
--
setting
Cannot set Wireless LAN --
During push-button setting
--
During PINCODE setting
--
During receiving data Flashes
SC-P400 Series
Indicators (LEDs)
Ink Paper NW1 NW2
Flashes
-- --
alternately1
Fhashes2 -- --
-- Flashes -- --
-- Flashes -- --
-- Flashes -- --
-- ON -- --
-- ON -- --
-- ON -- --
-- ON -- --
-- -- -- --
-- -- -- --
-- -- -- --
*1
-- -- --
*1
-- -- --
high -- -- --
*1
-- -- -- --
Flashes at
-- -- --
high speed
-- -- -- Flashes
-- -- -- Flashes
-- -- -- Flashes
*2
-- -- -- ON
-- -- -- Flashes
Flashes Flashes
-- --
alternately2 alternately1
Flashes Flashes
-- -- simultaneou simultaneou
sly sly
-- -- Flashes --
*1
Priority Printer status
Network initialization start
5
(LED ON)
Network initialization start
6
(LED OFF)
State of initialization start
7
7
Without network
7
connection
8
During Wireless LAN
8
connection (having IP)
8
During Wired LAN
8 connection (having IP)
Ink low
9
During power ON
sequence
10
During stand-by state
11
Waste ink pad near full
12
Note *1: The cartridge LED corresponding to each ink cartridge lights.
*2: After the setting succeeds, LED is turned on for 5 minutes, and turned off.
12
*3: In the waste ink pad near full state, the LED indication on the panel does not change.
13
Note : -- :
Flash:
14
Flash 2:
14
Flash 3:
14
Flash 4:
Flash at high speed: Repeats turning On and Off every 0.5 seconds.
14
Flashes alternately 1: Same as the "Flash"
Flashes alternately 2: Repeats turning Off and On every 1.25 seconds.
14
14
14
14
14
14
Features
Table 9-5. Indicators (LEDs) Function
Indicators (LEDs)
Power Ink Paper NW1
-- -- --
-- -- -- OFF
Flashes
-- -- --
alternately2
-- -- -- OFF
-- -- --
-- -- -- OFF
*1
-- Flashes --
Flashes -- --
ON -- --
-- -- --
No change
Repeats turning On and Off every 1.25 seconds.
Repeats On for 0.5 seconds, Off for 0.5 seconds,
On for 0.5 seconds, and Off for 1.0 second.
Repeats Off for 0.5 seconds, On for 0.5 seconds,
Off for 0.5 seconds, and On for 1.0 second.
Repeats On for 2.0 seconds and Off for 0.5 seconds.
Revision I
*1
Priority
NW2
ON ON 14
OFF 14
Flashes
14
alternately1
-- 14
ON -- 14
OFF 14
-- -- 15
-- -- 16
-- -- 17
*3
-- --
203