Changing A Wiper Blade - PEUGEOT 3008 2015 Handbook

In the event of a breakdown
Foglamps
These bulbs are replaced from outside the rear
bumper:
F pass your hand under the bumper,
F turn the bulb holder a quarter turn and
remove it,
F turn the bulb a quarter turn, pull it out and fit
a new bulb.
To reassemble, proceed in reverse order.
If changing a bulb within a few minutes of
switching off the ignition, take care not to
touch the silencer - there is a risk of burns!
276
High mount stop light (LED)
For replacement, contact a PEUGEOT dealer
or qualified workshop.
Licence plate lamps
F Insert a thin screwdriver into the slot in the
lens.
F Push it out to unclip it.
F Remove the lens.
F Pull the bulb out and change it.

Changing a wiper blade

Before removing a front
wiper
F Within one minute after switching off the
ignition, operate the wiper stalk to position
the wiper blades in the middle of the
windscreen (maintenance position).
Removing
F Lift the corresponding wiper arm away from
the windscreen.
F Unclip and remove the wiper blade.
Fitting
F Position and clip the new wiper blade to the
arm.
F Carefully lower the wiper arm.