PEUGEOT 3008 2015 Handbook page 42

Instruments
Adjusting the date and time
F Press the "7" or "8" button to display the
"Display configuration" menu, then press
OK.
F Press the "5" or "6" button to select the
"Date and time adjustment" button, then
press OK.
F Press the "7" or "8" button to select the
setting to modify. Confirm by pressing OK,
then modify the setting and confirm again to
save the modification.
F Adjust the settings one by one, confirming
with the OK button.
F Press the "5" or "6" button, then the OK
button to select the OK box and confirm or
the Back button to cancel.
As a safety measure, the driver must only
carry out operations that require sustained
attention when stationary.
40
Touch screen
This system gives access to:
- the permanent display of the time and
the ambient temperature (a blue symbol
appears when there is a risk of ice),
- the heating/air conditioning controls,
- menus for adjusting settings for vehicle
functions and systems,
- audio system and telephone controls and
the display of associated information,
- the display of visual parking aids (visual
parking sensor information, Park Assist, ...),
- Internet services and the display of
associated information.
and, depending on equipment, allows:
- access to the navigation system controls
and the display of associated information.
As a safety measure, the driver should
only carry out operations that require
close attention with the vehicle
stationary.
Some functions are not accessible when
driving.
General operation
Recommendations
This screen is of the capacitive type.
Use is possible in all temperatures.
Do not use pointed objects on the touch
screen.
Do not touch the touch screen with wet hands.
Use a soft clean cloth to clean the touch
screen.
Principles
Use the buttons below the touch screen for
access to the menus, then press the virtual
buttons in the touch screen.
Some menus may display across two pages:
press the "OPTIONS" button to access the
second page.
After a few moments with no action on the
second page, the first page is displayed
automatically.
To deactivate or activate a function, select
"OFF" or "ON".
Use this button to adjust the settings
for a function.