PEUGEOT 3008 2015 Handbook page 266

In the event of a breakdown
Repair procedure
F Switch off the ignition.
F Secure the speed limit sticker inside the
vehicle.
F Uncoil the pipe stowed under the
compressor.
F Connect the pipe from the compressor to
the bottle of sealant.
Avoid removing any foreign bodies which
have penetrated into the tyre.
264
F Turn the sealant bottle and secure it in the
cut-out provided on the compressor.
F Remove the valve cap from the tyre to be
repaired, and place it in a clean area.
F Connect the hose from the bottle of sealant
to the valve of the tyre to be repaired and
tighten firmly.
F Check that the compressor switch is at the
"O" position.
F Uncoil fully the electric cable, stowed under
the compressor.
F Connect the compressor's electrical
connector to the vehicle's 12 V socket.
F Switch on the ignition.