Practical information
Removable snow shield
Depending on country, the removable snow
shield is installed on the lower part of the front
bumper, to avoid the accumulation of snow at
the radiator cooling fan.
Do not forget to remove the removable
snow shield when the exterior temperature
is higher than 10°C (no risk of snowfall) or
if you are towing.
130
Fitting
F Put the removable snow shield in front of its
centring pin A on the front bumper.
F Fit it in place by pressing every clip B at the
four corners.
Removal
F Place a screwdriver at the hole near each
clip.
F Make a lever movement to unclip the four
clips B.
Changing a wiper blade
Putting the windscreen
wiper blades in the special
position
F Within one minute after switching off
the ignition, move the wiper stalk down
to position the wiper blades along the
windscreen pillars (special position).
Changing a windscreen wiper blade