Automatic Power Cut-Off To Accessories; Changing A Wiper Blade; Restoring Power; Removing A Front Or Rear Wiper Blade - PEUGEOT 4008 2012 Handbook

Automatic power cut-off
to accessories
After the engine has stopped, when the
ignition switch is in the "ACC" position
(or the vehicle in "ACC" mode) you
can still use functions such as the audio
equipment, windscreen wipers, dipped beam
headlamps, courtesy lamps, etc. for about
thirty minutes.
Cutting off
Once the thirty minutes have expired, the
power supply to the accessories will be
automatically cut off.

Restoring power

The power supply will be restored the next time
the ignition is switched on.
The period before cut-off can be
extended up to about sixty minutes
or deactivated, via the colour screen
"Equipment" menu.
Practical information
Changing a wiper
blade
Removing a front or rear
wiper blade
Raise the corresponding wiper arm.
Remove the wiper blade, sliding it towards
the outside.
Fitting a front or rear wiper
blade
At the front, check the size of the wiper
blade as the shorter blade is fitted on the
right-hand side of the vehicle.
Put the corresponding new wiper blade in
place and fix it.
Fold down the wiper arm carefully.
7
195