PEUGEOT 3008 2015 Handbook page 104

Ease of use and comfort
F Set the time by pressing the buttons 1.
F Simultaneously press buttons 4 and 5 to
save it.
This symbol will be displayed.
This symbol will be displayed.
Activation/Deactivation
F After having displayed the programmed
time using button 1, press button 5 until the
message "OK" is displayed.
When the signal has been received,
the message "OK" is displayed
along with this symbol.
This indicator lights up until the
heater starts.
This symbol is displayed when the
heater starts.
HTM: Heat Thermo Management
102
F To deactivate the programming, press
on button 4 until the message "OK" is
displayed.
This symbol will disappear.
During these operations, if the message
"FAIL" is displayed, it means that the
signal has not been received. Follow the
procedure again after having changed
position.
Stopping the heating
F Press button 5.
This symbol will remain lit.
This indicator light turns off.
Changing the heating level
The system has 5 heating levels: C1 (lowest
level) to C5 (highest level).
F After having displayed the heating level
using buttons 1, press simultaneously on
buttons 4 and 5.
The letter "C" will flash.
F Adjust the heating level by pressing buttons
1.
F Simultaneously press buttons 4 and 5 to
save the selected level.
The letter "C" will be displayed.
The presets are replaced by the new
entries. The programmed times are
memorised until the next change.
When the start time is activated, it is not
possible to change the heating level. You
must first deactivate the start time.
Operating fault
In the event of a fault with the programmable
heating, contact a PEUGEOT dealer or a
qualified workshop.