PEUGEOT 3008 2015 Handbook page 38

Instruments
Trip computer
Information displayed about the current journey
(range, fuel consumption, average speed, etc.).
Display of data on the
instrument panel
Trip computer data is displayed permanently
when you select the display mode "TRIP
COMPUTER" or "PERSONAL", depending on
the version.
In all other display modes, pressing the edge
of the wiper control stalk will cause this data to
appear temporarily on a specific screen.
36
F Press this button, located at the edge of the
wiper control stalk, to display the different
tabs in turn.
- Instant information with:
• range,
• current fuel consumption,
• time counter of the Stop & Start.
- Journey "1" with:
• average speed,
• average fuel consumption,
• distance travelled,
for the first journey.
- Journey "2" with:
• average speed,
• average fuel consumption,
• distance travelled,
for the second journey.
Reset trip
F When the desired trip is displayed press
the button at the edge of the wiper stalk for
more than 2 seconds.
Trips "1" and "2" are independent and are used
identically.
Trip "1" allows daily calculations to be carried
out, for example, and trip "2" allows monthly
calculations.
A few definitions...
Range
(miles or km)
The distance which can still be
travelled with the fuel remaining
in the tank (at the average fuel
consumption seen over the last
few miles (kilometres) travelled).