PEUGEOT 3008 2015 Handbook page 261

F With the vehicle unlocked, open the fuel
filler flap; the blue filler cap for the AdBlue
tank is located to the left of the black fuel
filler cap.
F Turn the blue cap a 6
th of a turn anti-
clockwise.
F Remove the blue cap downwards.
F Obtain a AdBlue
® container. After first
checking the use-by date, read the
instructions on the label carefully before
pouring the contents of the into your
vehicle's AdBlue ® tank.
Important: if your vehicle's AdBlue
is completely empty - confirmed by the
alert messages and the impossibility of
starting the engine - you must add at least
®
4 litres and no more than 10 litres.
F After emptying the container, wipe away any
spillage around the tank filler using a damp
cloth.
If any fluid is spilt or splashed, wash
immediately with cold water or wipe with a
damp cloth.
If the fluid has crystallised, clean it off
using a sponge and hot water.
F Refit the blue cap to the tank filler and turn it
a 6 th of a turn clockwise, to its stop.
F Close the fuel filler flap.
®
tank Important: in the event of a top-up after
a breakdown because of a lack of
AdBlue, you must wait around 5 minutes
before switching on the ignition, without
opening the driver's door, locking
the vehicle, introducing the key into
the ignition switch, or introducing
the key of the " Keyless Entry and
Starting" system into the passenger
compartment.
Switch on the ignition, then wait for
10 seconds before starting the engine.
Practical information
7
259