PEUGEOT 3008 2015 Handbook page 81

Electric driver's seat
To adjust the seat electrically, switch
on the ignition, or start the engine if the
vehicle has gone into energy economy
mode.
These are accessible approximately one
minute after opening the driver's door.
They are deactivated approximately one
minute after switching off the ignition.
1. Adjusting the angle and height of the seat
cushion / Adjusting the seat forwards and
backwards
F Raise or lower the front of the control to
obtain the desired seat cushion angle.
F Raise or lower the rear of the control to
raise or lower the seat.
F Slide the control forwards or backwards to
move the seat forwards or backwards.
2. Adjusting the seat backrest angle
F Turn the control forwards or backwards to
recline the backrest to the desired angle.
3. Adjusting the height of the head restraint
Refer to the corresponding section.
Ease of use and comfort
4. Adjusting the length of the seat cushion
F Pull the handle forwards to release the
cushion, then move the front part of the seat
cushion forwards or backwards.
3
79