Changing A Wiper Blade - PEUGEOT 3008 2017 Handbook

In the event of a breakdown
Foglamps
These bulbs are replaced from outside the rear
bumper:
F Pass your hand under the bumper,
F Turn the bulb holder a quarter turn and
remove it,
F Turn the bulb a quarter turn, pull it out and
change it.
To refit, carry out these operations in reverse
order.
If changing a bulb within a few minutes
of switching off the ignition, take care not
to touch the exhaust – there is a risk of
burns!
252
Third brake lamp (LED)
Licence plate lamps
F Insert a thin screwdriver into the slot in the
lens.
F Push it out to unclip it.
F Remove the lens.
F Pull the bulb out and change it.

Changing a wiper blade

Before removing a front
wiper
F Within one minute after switching off the
ignition, operate the wiper control stalk to
position the wiper blades in the middle of
the windscreen (maintenance position).
Removing
F Lift the corresponding wiper arm away from
the windscreen.
F Unclip and remove the wiper blade.
Refitting
F Position and clip the new wiper blade to the
arm.
F Carefully lower the wiper arm.