PEUGEOT 3008 2015 Handbook page 277

F From the outside, carefully remove the lamp
by pulling it to the rear, then up.
F Disconnect the lamp connector.
F Turn the bulb holder a quarter turn using a
standard pair of pliers and pull it out.
F Pull the bulb out and replace it.
For reassembly, carry out these operations in
reverse order.
Reversing lamps (on the tailgate)
F Open the tailgate, then insert a flat
screwdriver into the cut-out to unclip the
access cover on the side in question.
F Unblock the lamp fastening bolt with a
10 mm box spanner.
F Manually unscrew and remove the lamp
fixing nut.
F Disengage the retaining clip, while pushing
the lamp out slightly.
In the event of a breakdown
F From the outside, carefully remove the lamp
by pulling it to the rear.
F Disconnect the lamp connector by pressing
on each side.
F Turn the bulb holder a quarter turn and pull
it out.
F Pull the bulb out and change it.
To refit, carry out these operations in reverse
order.
8
275