PEUGEOT 3008 2015 Handbook page 272

In the event of a breakdown
F Put the wheel in place on the hub.
F Screw in the bolts by hand to the stop.
F Pre-tighten the security bolt using the
wheelbrace 5 fitted with the security socket
2.
F Pre-tighten the other bolts using the
wheelbrace 5 only.
F Lower the vehicle fully.
F Fold the jack 6 and detach it.
270
F Tighten the security bolt using the
wheelbrace 5 fitted with the security
socket 2.
F Tighten the other bolts using the
wheelbrace 5 only.
F Refit the bolt covers to the bolts (according
to equipment).
F Store the tools.
After changing a wheel
Put the punctured wheel in the boot or,
depending on version, remove the central cover
first to store it beneath the floor in place of the
spare wheel.
With a "space-saver" type spare wheel
The following is recommended:
- deactivate some driving aid functions
(Active Safety Brake, Dynamic cruise
control with Stop function...), as
indicated in the label attached to the
wheel,
- do not exceed the maximum
authorised speed of 50 mph (80 km/h).
Visit a PEUGEOT dealer or a qualified
workshop as soon as possible to have the
tightness of the screws and the pressure
of the spare wheel checked.
Have the punctured tyre examined. After
inspection, the technician will advise you
on whether the tyre can be repaired or if it
must be replaced.