PEUGEOT 3008 2015 Handbook page 202

Driving
The brake lights illuminate as soon as
the braking system is activated with
deceleration of the vehicle.
The active cruise control system
is a driving aid that cannot, in any
circumstances, replace the need to
observe speed limits and safety distances,
nor the need for vigilance on the part of
the driver.
It is recommended that you always keep
your feet close to the pedals.
The driver must be ready to take back
control of their vehicle at any time,
using the brake or accelerator pedal as
appropriate.
Steering mounted controls
1. Selection of cruise control mode.
200
2. Use the current speed as the speed
setting / Lower the speed setting.
3. Use the current speed as the speed
setting / Raise the speed setting.
4. Pause / Resume cruise control.
5. Use the speed suggested by the speed
limit signs recognition system.
6. Display and adjustment of the
programmed inter-vehicle distance.
For more information on Speed limit signs
recognition and recommendation, refer to
the corresponding section.
Displays on the instrument
panel
7. Indication of the presence / absence of a
target vehicle.
8. Indication of cruise control activation /
deactivation.
9. Value of the speed setting.
10. Indication that vehicle is held stationary.
11. Speed suggested by the speed limit
recognition system.
If a vehicle is detected, the symbol 7 is filled
with the colour associated with the cruise
control mode. By default, the symbol 7 is
empty.
In cruise control activated mode, the symbol
8 appears in green. By default, the symbol 8
appears in grey.
12. Inter-vehicle distance setting.
13. Position of vehicle detected by the radar.
This information is visible in the instrument
panel in the "DRIVING" display mode.