PEUGEOT 3008 2015 Handbook page 204

Driving
Modification of the speed
setting
Engine running and cruise control on (green),
you can modify the speed setting.
Modification from the current
speed
F By successive short presses on button 2
or 3, to raise or lower the setting in steps of
+ or - 1 mph (km/h).
F By a maintained press on button 2 or 3,
to raise or lower the setting in steps of
+ or - 3 mph (5 km/h).
Take care: a prolonged press on button 2
or 3 will cause a very quick change in the
speed of your vehicle.
202
Modification from the speed limit
sign recognition system
F The suggested speed is displayed in the
instrument panel.
F Make an initial press on button 5; a
message is displayed to confirm the
memorisation request.
F Press button 5 again to save the suggested
speed.
The speed displays immediately in the
instrument panel as the new speed setting.
For more information on Speed limit signs
recognition and recommendation, refer to
the corresponding section.
As a precaution, it is recommended
that you select a cruise speed close to
the current speed of your vehicle, so
as to avoid any sudden acceleration or
deceleration of the vehicle.
Modification of the
programmed inter-vehicle
distance
Three threshold settings are suggested for the
inter-vehicle distance:
- "Distant" (3 dashes),
- "Normal" (2 dashes),
- "Close" (1 dash).
Engine running and cruise control selected
(grey), you can change the inter-vehicle
distance setting:
F Press button 6 to display the selection
screen for inter-vehicle distance,
F By repeatedly pressing button 6, scroll
through the predefined setting levels.
The selection screen closes after a
few seconds.
The change then takes effect.
This setting remains in memory, whatever the
state of the system and when the ignition is
switched off.