PEUGEOT 3008 2015 Handbook page 275

Changing main beam headlamp
bulbs (on models with halogen
headlamps)
F Remove the protective cover by pulling the
tongue.
F Turn the bulb holder a quarter turn and pull
it out.
F Pull the bulb out and replace it.
For reassembly, carry out these operations in
reverse order.
Changing foglamp bulbs (on
models with halogen headlamps)
F Introduce a flat screwdriver in the hole in
the finisher.
F Pull and lever to unclip the foglamp finisher.
F With a Torx screwdriver, remove the two
module fastening screws.
F Remove the module from its housing.
In the event of a breakdown
F Disconnect the bulb holder connector.
F Turn the bulb holder a quarter turn and pull
it out.
F Change the assembly.
To refit, carry out these operations in reverse
order.
To replace this type of bulb, you can also
contact a PEUGEOT dealer or a qualified
workshop.
8
273