PEUGEOT 3008 2015 Handbook page 103

F To deactivate the function, press button 4
until the message "OK" is displayed.
This symbol and the indicator light will
turn off.
During these operations, if the message
"FAIL" is displayed, it means that the
signal has not been received. Follow the
procedure again after having changed
position.
Adjusting the operating time
F Press the buttons 1 to display the operating
time.
This symbol will be displayed.
F After having displayed the operating time,
press buttons 4 and 5 simultaneously within
10 seconds.
This symbol will flash.
F Adjust the time by pressing buttons 1: in
10 minute increments to a maximum of
30 minutes.
F Simultaneously press buttons 4 and 5 to
save the operating time.
This symbol will be displayed.
The factory value setting is 30 minutes.
Ease of use and comfort
Deferred switching on
You must program your departure time for the
system to automatically calculate the optimal
time to start the heater.
Programming the departure time
F Press buttons 1 to display the programmed
time.
This symbol will be displayed.
F After having displayed the programmed
time, press buttons 4 and 5 simultaneously
within 10 seconds.
This symbol will flash.
3
101