15.10
Adjusting the headlight range
15.11
Changing the turn signal bulb
Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider.
»
If the light-dark border does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
Loosen screw
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on
the lower mark for a motorcycle with driver. The boundary
between light and dark must be exactly on the lower mark-
ing for a motorcycle with rider (attached during checking the
headlight setting).
V00369-10
Info
A change in weight on the vehicle may require a correc-
tion of the headlight range.
–
Tighten screw
ELECTRICAL SYSTEM 15
p. 123)
p. 122)
1
.
1
.
123