Installing The Fork Legs - KTM 250 EXC-F 2019 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.8
66

Installing the fork legs

402556-10
V00452-11
402556-10
E00378-11
Main work
(EXC‑F EU/AU/AR/BR)
–
Position the fork legs.
1
Bleeder screws
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the top edge of the upper
triple clamp.
–
2
Tighten screws .
Guideline
Screw, top triple
clamp
–
3
Tighten screws .
Guideline
Screw, bottom
triple clamp
(EXC‑F Six Days)
–
Position the fork legs.
1
Bleeder screws
Info
The rebound damping is located in right fork
leg REB (red adjusting screw). The compression
damping is located in left fork leg COM (white
adjusting screw).
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the top edge of the upper
triple clamp.
–
2
Tighten screws .
Guideline
Screw, top triple
clamp
–
3
Tighten screws .
Guideline
Screw, bottom
triple clamp
are positioned toward the front.
M8 20 Nm
(14.8 lbf ft)
M8 15 Nm
(11.1 lbf ft)
are positioned toward the front.
M8 17 Nm
(12.5 lbf ft)
M8 15 Nm
(11.1 lbf ft)