Service Work On The Chassis 12; Raising The Motorcycle With The Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM 250 EXC-F 2019 Owner's Manual

12.1

Raising the motorcycle with the lift stand

12.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
12.3

Bleeding the fork legs

Note
Danger of damage The parked vehicle can roll away or fall
over.
–
Park the vehicle on a firm and level surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
401942-01
–
Secure the motorcycle against falling over.
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
with your foot and lean the motorcycle on it.
Info
While riding, the side stand must be folded up and
secured with the rubber band.
401943-10
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
402556-10
Finishing work
–
Remove the motorcycle from the lift stand. (

SERVICE WORK ON THE CHASSIS 12

1
1
.
to the ground
p. 63)
p. 63)
63