Changing The Fuses Of Individual Power Consumers - KTM 250 EXC-F 2019 Owner's Manual

15.5

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
–
Take off protection caps
–
Remove faulty main fuse
Info
You can recognize a faulty fuse by a burned-out fuse
A
wire
A spare fuse
–
Install a new main fuse.
Fuse (58011109120) (
–
Check that the electrical equipment is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
E00362-10
Finishing work
–
Mount the seat. (
Preparatory work
–
Press and hold the kill switch
the engine stops.
–
Remove the seat. (
Main work
–
Pull the EFI control unit
one side.
E00394-10
–
Open fuse box cover
–
Remove the faulty fuse.
Guideline
(EXC‑F EU, EXC‑F AR, EXC‑F Six Days)
Fuse 1 ‑ 10 A – EFI control unit, lambda sensor, com-
bination instrument, combination switch (optional), fuel
injection, diagnostics connector, fuse 4
E00395-10
ELECTRICAL SYSTEM 15
2
.
3
.
.
4
is located in the starter relay.
p. 154)
p. 78)
while the engine is idling until
p. 77)
1
from the holder and hang it to
2
.
119