Installing The Battery - KTM 250 EXC-F 2019 Owner's Manual

15 ELECTRICAL SYSTEM
15.2
114

Installing the battery

H00386-10
(EXC‑F BR)
Warning
Risk of injury Battery acid and battery gases cause
serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and safety
glasses.
–
Avoid contact with battery acid and battery
gases.
–
Keep sparks or open flames away from the bat-
tery.
–
Only charge batteries in well-ventilated rooms.
–
Rinse the affected area immediately with
plenty of water in the event of contact with the
skin.
–
Rinse eyes with water for at least 15 minutes
and consult a doctor immediately if battery
acid and battery gases get into the eyes.
–
Disconnect negative cable
–
Pull back positive terminal cover
positive cable from the battery.
–
3
Remove screw .
–
4
Pull holding bracket
the top.
Main work
–
Insert the battery into the battery compartment with the termi-
nals facing forward and secure with holding bracket
(EXC‑F EU/AU/AR, EXC‑F Six Days)
Battery (HJTZ5S-FP-C) (
(EXC‑F BR)
Battery (YTX5L-BS) (
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
3
Connect positive cable
Guideline
Screw, battery termi-
nal
–
Slide positive terminal cover
–
4
Connect negative cable
1
from the battery.
2
and disconnect the
forward and remove battery toward
1
p. 154)
p. 154)
2
.
M6 10 Nm (7.4 lbf ft)
to the battery.
M5 2.5 Nm
(1.84 lbf ft)
7
over the positive terminal.
to the battery.
.