12 SERVICE WORK ON THE CHASSIS
12.10
68
Removing the lower triple clamp
E00382-10
E00383-10
(EXC‑F Six Days)
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
(
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
Open the cable holder in front of the right radiator and detach
the wiring harness.
–
1
Remove screws
and hang the voltage regulator to the side.
–
Open the cable holder in front of the left radiator and detach
the wiring harness.
–
2
Remove screw
.
–
3
Remove screw
.
–
Take off the upper triple clamp with the handlebar and set it
aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
4
Remove O-ring
and protective ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
p. 121)
p. 63)
(
p. 107)
p. 65)
p. 75)
5
.