Table of Contents
Advertisement
4.3.2
IP Camera
In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving, and
click Default to revert back to original factory setting.
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only, Left
click on the camera icon. The camera icon turns red when it is selected. The camera icon will be different
that depends on the camera type.
IP camera icon
Analog camera icon
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical block represent the
day in the week block (Sunday to Saturday). To record in full 24 hours and 7 days a week, select the
recording mode and click the button. If you want to only record at a particular time or day, click Schedule
button and select the Recording Mode , and then click on the time or day blocks.
72
Advertisement
Table of Contents
