Table of Contents
Advertisement
FaceFinder: Enable to send out the alarm when the selected channel has detected face.
i
Only the camera has setup FaceFinder detection will be available for selecting.
Enable/disable the POS Keyword check box, to scan the data from the POS if it matches the
keyword (see also
Enable/disable the Alarm Message check box, to active with external alarm message by your own
-
program. For the detail configuration, please contact the local reseller.
Enable/disable the Alarm Button check box, to active manual alarm function. To define alarm
-
message of manually alarm trigger. Click alarm button and select the alarm button # and fill in the
description of alarm button. When the alarm buttons have been setup, the Alarm Button icon will
show up on the DVR application UI. User can click the Alarm button icon to trigger the pre-defined
alarm.
6.
In (5) Alarm Reset, click the camera number (01 to 16) to set the reset condition of alarm. Once alarm
is reset, all alarm action will stop at the moment. If the sensor normal status is high, set the sensor
condition to low.
To set sensor status of IP camera, click IP Camera Sensor. In IP Camera Alarm Setting windows, click
High/Low to set sensor status.
-
Alarm Reset Time: Set a time for the alarm auto reset. When an alarm happen such as motion
detected and video loss, the alarm will reset at the alarm reset time.
7.
In (6) Priority, set the priority of this alarm set.
8.
In (7) Action, you may now set the alarm action for the system to perform when the alarm condition is
Chapter
4.9.10).
88
Advertisement
Table of Contents
