4.9.11 Missing, Suspicious Object, And Scene Change Detected - Speco DVRPC16T2TB User Manual

4.9.11 Missing, Suspicious Object, and Scene Change Detected

Missing Object
-
Select the certain object on the screen for the system to detect; when the object is disappear or move
and the system will alarm. Click OK to exit and save the configuration. To exam the setup condition, click
Start Test.
1. Select the camera number (0-16) and press RIGHT button on the mouse to call up the setup
windows.
2. Click Save to capture the image for comparing reference first. To view the captured image, enable the
Show Reference Image check box. The captured image will display on screen. The reference image
is sharing with the Suspicious Object and Scene Change function.
3. Mark the Enable check box to setup the condition.
4. Use the mouse to click and drag the frame on the screen. User can drag more than one frame.
5. Sensitivity: Set the system detects sensitivity.
6. Delay Time: Set the lasting time for system to detect the object.
7. To reset all object frames, click Clean. To clean an object frame, click right button of mouse and drag
the object frame that user want to clean.
Suspicious Object
-
Suspicious Object is including the object missing or the doubtful object appears on the screen. Click OK
to save and exit the setup windows. To exam the setup condition, click Start Test.
1. Select the camera number (0-16) and press right button on the mouse to call up the setup windows.
And then, click the Suspicious Object Tab.
2. Click Save to capture the image for comparing reference. To view the captured image, enable the
Show Reference Image check box. The captured image will display on screen. The reference image
is sharing with the Missing Object and Scene Change function.
3. Mark the Enable check box to setup the condition.
4. Sensitive: Set the system detects sensitivity.
5. Delay Time: Set the lasting time for system to detect the object.
6. Use the mouse to click and drag the frame on the screen.
Maximum_Object: the maximum detect size. The objects are out of the maximum detect area will
be disregard. Use mouse to click and drag the frame on the screen.
Minimum_Object: the minimum detect area. When the objects are smaller than the minimum
detect area, the system will disregard. Use mouse to click and drag the frame on the screen.
7. Enable Mask: Mark an area on the screen to disregards the motion in the marked area and to only
monitor outside the marked area. Mark the Enable Mask check box, click and drag the mask frame
on the screen.
8. To reset all object frames, click Clean. To clean an object frame, click right button of mouse and drag
97