Table of Contents
Advertisement
6.1.1.2
Advance Setting
In WebViewer UI, click Remote Setup button (
click Remote Setup button, the setup menu bar will appear as below shown:
Click the setup selection to enter the setup window. To exit setup menu bar, click OK.
System Setting
In the System Setting windows, click Update to accept the new settings, click Cancel to exit without saving,
and click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(1) Delete recorded data after
If you want the system to automatically erase the data after a certain days, enable the Delete recorded data
after check box and enter the numbers of days in Days text box.
(2) Delete event and alarm log after
If you want the system to automatically erase the event and alarm log files after a certain days, enable the
Delete event and alarm log after check box and enter the numbers of days in Days text box.
(3) Video Standard
Change and select the proper video system according to your camera video system. If the video system
setting is wrong, the video would appear abnormal.
(4) Attention Please
Check the attentiveness of the person who is monitoring the system. You may set the number of times the
Attention dialog box to appear in a day in Times per day text box. When this feature is enabled, the
Attention dialog box would appear. The person who is monitoring the system must enter the same number
that appears from the left box at the right text box and then click OK.
(5) Sequence period
Set the TV out display time gap from 3 to 10 sec. before it switches to the next camera.
) to configure setting of the remote DVR server. After
109
(6)
(7)
(8)
Advertisement
Table of Contents
