Table of Contents
Advertisement
4.2.3
Setup PTZ Tracking
PTZ tracking allows user to setup a select range for PTZ camera to tracking the object automatically when
object is out of selected rage.
i
The PTZ tracking will be available when the camera is enabled PTZ function.
1. User need to enable the PTZ function of the camera if the camera is a PTZ/IP PTZ camera.(see also
Chapter
3.13)
2. Click Detail from the Camera Setting windows.
3. Configure the following selections to complete the PTZ tracking.
(1) Show Trigger Line in Live Video: Enable/disable the tracking line on the preview screen.
(2) Left Trigger Line(red line): Set the left edge of the tracking range. If the object is out of the range
edge, the camera will automatically move to track the object.
(3) Right Trigger Line(red line): Set the right edge of the tracking range. If the object is out of the range
edge, the camera will automatically move to track the object.
Left Trigger Line
(4) Maximum Size(green frame): Set the maximum size of the object for detection.
(5) Minimum Size(green frame): Set the minimum size of the object for detection.
64
Right Trigger Line
Advertisement
Table of Contents
