Familiarizing The Buttons In Remote Console - Speco DVRPC16T2TB User Manual

6.3

Familiarizing the Buttons in Remote Console

Name
(1) DirectDraw
i
Not all graphic cards can support this function.
(2) Exit
(3) Volume
(4) Split Screen
Mode
- If there are only 4 cameras, you won't be able to switch to 9, 16, and 13 split screen mode.
i
- To change the video quality, right-click on the screen and select between High and Normal.
- The DVR series don't support 32-split screen display mode.
(5) Record
(6) Emap
(7) Network
(8) Setup
(9) PTZ
(10) Preview
(11) Playback
(12) Status Bar
(13) Camera ID
(14) Snapshot
(15) Event log
(16) Auto Scan
(17) Full screen
Function
Enhance the video quality.
Close the Remote Console.
Enable/disable the sound.
Select from 6 different split screen type to playback the recorded video file of all the
camera, or one camera over the other or alongside on a single screen.
Start/stop video recording.
Display the map in each area, the camera/sensor/relay location and the warning event. (see
also Chapter 3.6)
Enable/disable remote system access. This feature allows you to access DVR server from a
remote location via internet connection.
Configure the Remote Console setting. (see also
Access PTZ control panel. Beside PTZ camera, DVR system also support mega pixel IP
camera.(see Chapter 6.3.2)
Switch to Preview/Advanced mode. This allows you to view live camera display.
Switch to Playback mode. This allows you to view the recorded video file. (see
Display the current date, time and hard disk free space.
Show the number of cameras that are being viewed. When you are in single screen mode,
click the camera ID number to switch and view other camera.
Capture and save the screen shot either in *.jpg or *.bmp format.
Show the record of activities that take place in the system. To filter the records, select and
click the option button to only display Event, System, Operation, Network or POS.
Click it to start channel auto cycle display.
Use the entire area of the screen to only display the video.To return, Right click the mouse or
press ESC on the keyboard.
Chapter
127
6.3.1)
Chapter 6.4)