Setup The Ip Ptz Camera - Speco DVRPC16T2TB User Manual

3.7.2

Setup the IP PTZ Camera

1. In the PTZ control panel, click Setup.
2. When the PTZ Setup dialog box appears, click IP PTZ tab.
3. Select the camera number and check the Use PTZ box.
4. In the Connection Settings section, select the Protocol and Model of PTZ camera that user wants to
connect and enter the IP or URL of IP camera in IP Camera Site column. Mark the Authentication box if
ID and Password is required when connecting to IP PTZ camera. And then, click Save to keep the
settings.
5. In the Preset Setting section, use the PTZ control panel and adjust the position of the PTZ camera and
select the preset number to assign a number for the PTZ camera current position.
6. Set the DwellTime (1-60 sec) for how long the IP PTZ camera stays in that position before it moves to
the next one. If you want to add description, check the Show Preset Name box and in the Preset Name
text box, type the word. When done, click Save to keep the settings.
7. Repeat step 5 & 6, if you want to save another IP PTZ camera position.
8. Restore AutoPan Time: set a time period for restoring auto path function after the IP PTZ camera has
been moved. Mark the check box and set the time period in second.
9. Using Joystick: Enable/disable Using Joystick such as USB joystick device.
10. Show moving direction indicator line: enable/disable to show the direction line when uses mouse
drag on screen in PTZ mode.
11. Iris: To adjust the iris of IP PTZ camera. It may not support that depends on brand of the PTZ camera.
12. OSD: To allow call out IP PTZ camera factory's OSD setup menu. The OSD setup menu may vary that
depends on the brand of IP PTZ camera.
13. When is done, click OK to save the setting or Click Cancel, to leave without saving the new setting.
14. When PTZ camera is enabling, user can control PTZ camera by using the mouse and on screen PTZ
control bar.
15. Click on screen PTZ control icon to call out the control bar.
33