Table of Contents
Advertisement
Name
(10) Number buttons
(11) Control Buttons
(12)
(13)
(14)
(15)
(16)
(17) USB 2.0 port
(18)
Function
A functional key for multiple system control. Press
multiple function modes and the
exit multiple function modes, press
display mode
display mode
Move to left direction on menu control
To move PTZ camera lens to left in PTZ mode
Move to right direction on menu control
To move PTZ camera lens to right in PTZ mode
To move PTZ camera lens to up
Move to up direction on menu control
To move PTZ camera lens to down
Move to down direction on menu control
Confirm or make a selection
To playback video at faster speed of 2x, 4x, 6x, 8x, 16x, or 32x.
To pause playback
To start playback
To rewind the recorded video
Set a video segment to playback repeat(see also
To backup recorded video file to USB storage device(flash drive or external hard disk)
and DVD-ROM.
2 x USB 2.0 ports for connecting USB device, ex: USB flash drive, external hard disk,
mouse...and so on.
Operate the PTZ cameras automatically based on the selected camera group preset
position number.
Without setup preset position, the preset button (
i
when press it. To setup preset position, please refer to
+
: Switch to single screen display mode
+
: Switch to QUAD display mode
+
: Switch to 9 spilt screen display mode
+
: Switch to 16 split screen display mode
+
: Switch to one single and 7 + 1 spilt screen
+
: Switch to one single and 12+ 1 spilt screen
+
: Enable/disable channel auto switch cycle
+
: Switch to full screen mode.
Chapter
3
to enable
button will light up blue. To
again.
1.2.1.1)
) will not be functional
Chapter
3.7.
Advertisement
Table of Contents
