Table of Contents
Advertisement
Name
(15) Event log
(16) Sequence
(17) Full screen
(18) Alarm
(19) Live Playback
button
(20) Volume
(21) On Screen
Keyboard
Function
Click it to pop-up the Event Log Viewer dialog to check Event, Operation, POS (Point of
Sales), System and Network logs. You can select a desired date and a log item to show all
logs data in the table.
Start/Stop video screen cycle switch
Use the entire area of the screen to only display the video. To return, press the right button
of the mouse or ESC on the keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to toggle to only display
one of the video in the multiple-screen mode or all.
Click Alarm Status (
If user has enabled the live playback function in System setup, the live playback icon
should be seemed on the each channel of the preview screen(see also
in
Chapter
4.1).
Click
to playback the recorded file instantly in preview mode. When the channel is in
live playback mode, the icon is
channel, the playback tool bar (
up. Using the playback tool bar to control the playback. Total 4 channels can be live
playback at the same time.
Adjust the audio volume to a proper volume.
If the keyboard is not available, you may use the Virtual Keyboard.
) button to view the status or advanced alarm information.
. Move the mouse to the bottom of the live playback
13
(9) Miscellaneous
) will show
Advertisement
Table of Contents
